The Envirolyte ELA-200 is a next step in our development of automated Envirolyte machines to suite our customer's needs for automation in the process of generation of activated solutions.

The Envirolyte ELA-200 has been designed for production of Neutral Anolyte only.

Some automation and easy operating procedures give the added benefits to rapid elivery of safe and fast acting disinfectan - Neutral Anolyte.

The strenght of Neutral Anolyte in terms of active chlorine concentration can be adjasted by current setting.

  • key features
  • Additional Information

  • >>>The control system of ELA-200 units is simple and easy to operate. It can be altered to suit different applications and conditions.
  • >>>A flow controller is installed in the Hydraulical part to shut the Envirolyte unit if there is interruption of water supply and to start the unit as soon as water flow resumes.
  • >>>The enclosures are made of non-corrosive materials. Tubes and connectors are of EPDM/PVDF plastics and are highly resistant against aggressive solutions.
  • >>>All input and output connectors are located on the sides of the boxes to allow them wall-mountable.
  • >>>A simple on/off switch with power indicator starts and stops the ELA-200 units manually.
  • >>>Level switches enable to start and stop ELA-200 unit automatically.
  • >>>Alarm is inbuilt in the unit but can be arranged in any remote area through external connection.
  • Output capacity: 20 LPH of ANK-Neutral Anolyte ONLY with possibility for Catholyte isolation for Ph correction of ANK or Acidic Anolyte and Catholyte with controlled ratio between the two fluids.
    FAC (Minimum): 500 ppm
    Power source: 110/230 VAC
    Salt consumption per 1 liter of Anolyte: ~2.5 g depending on the source water
    Flushing mode: Semi automated

    Click on link above to download brochure.

    Kathy Gordon
    John Doe

    Thank you!

    Leave your comment

    Related Products